The STEVAL-ISB035V1 is an evaluation board based on the STBC03 battery power management IC, integrating a linear charger for single-cell Li-Ion batteries with battery protection functions, an LDO regulator and two SPDT load switches.
The device uses a CC-CV algorithm to charge the battery; the fast-charge and pre-charge currents can be programmed using an external resistor.
The input supply voltage is used to charge the battery and provide power to the LDO regulator. When a valid input voltage is not present and the battery is not empty, the device automatically switches to battery power.
When shutdown mode is activated, battery power consumption falls to less than 100 nA.
Two 3-Ω SPDT load switches with dedicated control input are embedded to intelligently manage overall system power consumption. The STEVAL-ISB035V1 can work in standalone mode, but several digital inputs can be used to control the STBC03 for full operation.
The STEVAL-ISB035V1 evaluation board provides full access to STBC03 functions through header connectors and can be supplied through a micro-AB USB connector.
主要特性
！注意：請使用瀏覽器自帶下載，迅雷等下載軟件可能無法下載到有效資源。
| 器件 | 類型 | 描述 | 數據手冊 |
|---|---|---|---|
| STBC03 | 充電器 | 帶LDO和負載開關的鋰離子線性電池充電器 | 點擊下載 |
歡迎加入EEWorld參考設計群，也許能碰到搞同一個設計的小伙伴，群聊設計經驗和難點。 入群方式：微信搜索“helloeeworld”或者掃描二維碼，備注：參考設計，即可被拉入群。 另外，如您在下載此設計遇到問題，也可以微信添加“helloeeworld”及時溝通。
EEWorld Datasheet 技術支持
京公網安備 11010802033920號
Copyright ? 2005-2025 EEWORLD.com.cn, Inc. All rights reserved
IAUT165N08S5N029ATMA1
