| The NIS5021MT1GEVB Evaluation Board showcases a cost effective, resettable fuse which can greatly enhance the reliability of a hard drive or other circuit from both catastrophic and shutdown failures. The eFuse is designed to buffer the load device from excessive input voltage which can damage sensitive circuits. It includes an overvoltage clamp circuit that limits the output voltage during transients but does not shut the unit down, thereby allowing the load circuit to continue its operation. The eFuse also includes an internal Undervoltage Lockout Circuit as well as an Internal Charge Pump. The NIS5021MT1EVB evaluation board has many features which make it simple to observe the functionality and performance of NIS5x2x line of eFuses including multiple connectors available for all eFuse pins (VCC, GND, SRC, enable, ILIM, dv/dt), input and output capacitors, a pushbutton switch and a MOSFET to connect the enable pin to GND or float as needed, green and yellow LEDs to indicate whether the eFuse enable pin voltage is high (device enabled)/low (device disabled)/mid (thermal shutdown), 5 current limit resistor options available directly on the board (20, 25, 30, 35, 40 Ω), 4 load resistor options (200 Ω each) on the board, a jumper to short circuit the load, kelvin or direct sensing options via jumpers between pin 6 and 7 for NIS5x2x. |
Features
|
|
Applications
|
！注意：請使用瀏覽器自帶下載，迅雷等下載軟件可能無法下載到有效資源。
| 器件 | 類型 | 描述 | 數據手冊 |
|---|---|---|---|
| 2N7002K | MOSFETs | N-Channel Small Signal MOSFET 60V 380mA 1.6 Ω | 點擊下載 |
| BAS16H | Small Signal Switching Diodes | 100 V Switching Diode | 點擊下載 |
| MMBT3904L | 點擊下載 |
歡迎加入EEWorld參考設計群，也許能碰到搞同一個設計的小伙伴，群聊設計經驗和難點。 入群方式：微信搜索“helloeeworld”或者掃描二維碼，備注：參考設計，即可被拉入群。 另外，如您在下載此設計遇到問題，也可以微信添加“helloeeworld”及時溝通。
EEWorld Datasheet 技術支持
京公網安備 11010802033920號
Copyright ? 2005-2025 EEWORLD.com.cn, Inc. All rights reserved
AT30TSE754-XM8-B
