| NCP360 is able to disconnect the systems from its output pin incase wrong VBUS operating conditions is detected.The systemis positive overvoltage protected up to +20V. Thanks to this device using internal PMOS FET, no external device is necessary, reducing the system cost and the PCB area of the application board. NCP360 is able to instantaneously disconnect the output from the input if the input voltage exceeds the overvoltage threshold (OVLO). NCP360 provides a negative going flag output, which alerts the system that a fault has occurred.In addition, the device has ESD protected input (15kV Air) when bypassed with a 1μF or larger capacitor. |
Features
|
|
！注意：請使用瀏覽器自帶下載，迅雷等下載軟件可能無法下載到有效資源。
| 器件 | 類型 | 描述 | 數據手冊 |
|---|---|---|---|
| NCP360 | Voltage Protection | Overvoltage Protection Circuit, USB Positive, with Internal PMOS FET and Status Flag | 點擊下載 |
歡迎加入EEWorld參考設計群，也許能碰到搞同一個設計的小伙伴，群聊設計經驗和難點。 入群方式：微信搜索“helloeeworld”或者掃描二維碼，備注：參考設計，即可被拉入群。 另外，如您在下載此設計遇到問題，也可以微信添加“helloeeworld”及時溝通。
EEWorld Datasheet 技術支持
京公網安備 11010802033920號
Copyright ? 2005-2025 EEWORLD.com.cn, Inc. All rights reserved
IPLK70R750P7ATMA1
