The Dual LED Ballast Shield Evaluation Board utilizes the NCV78763, a single chip, highly efficient smart power ballast and dual LED driver designed for high current LEDs that provides the complete solution to drive two strings up to 60 V, by means of two internal independent buck switch channel outputs with the PCA9655E to provide 16 bits of General Purpose parallel Input and Output (GPIO) expansion through the I2C-bus and SMBus. Due to the SPI programmability, one single hardware setup can support multiple system configurations for a flexible platform solution approach. Power Supply needed: Digi-Key Mouser |
!注意:請使用瀏覽器自帶下載,迅雷等下載軟件可能無法下載到有效資源。
器件 | 類型 | 描述 | 數據手冊 |
---|---|---|---|
MBRA2H100 | Schottky Diodes & Schottky Rectifiers | Schottky Power Rectifier, Surface Mount, 2.0 A, 100 V | 點擊下載 |
MBRD5H100T4G | Schottky Diodes & Schottky Rectifiers | Schottky Power Rectifier, Switch-mode, 5.0 A, 100 V | 點擊下載 |
MBRS3100T3 | Schottky Diodes & Schottky Rectifiers | Schottky Power Rectifier, Surface Mount, 3.0 A, 100 V | 點擊下載 |
NCV78763 | DC-DC LED Drivers | Dual LED Driver and Power Ballast, for Automotive Front Lighting, 1.6 A, 2nd Generation | 點擊下載 |
NTD6416AN | MOSFETs | Single N-Channel Power MOSFET 100V, 17A, 81mΩ | 點擊下載 |
PCA9655E | I/O Expanders | I/O Port Expander, I2C, 16-bit, Remote Low Voltage w/Interrupt | 點擊下載 |
歡迎加入EEWorld參考設計群,也許能碰到搞同一個設計的小伙伴,群聊設計經驗和難點。 入群方式:微信搜索“helloeeworld”或者掃描二維碼,備注:參考設計,即可被拉入群。 另外,如您在下載此設計遇到問題,也可以微信添加“helloeeworld”及時溝通。
EEWorld Datasheet 技術支持