遙控車太慢了！！！我受不了！自己做一個！說干就干，基于ARDUINO手機藍牙控制，完成了這個超強的作品，全手工制造。歡迎學習。少走彎路！ 作者：漫步在宇宙的邊緣 https://www.bilibili.com/read/cv6217381 出處： bilibili

這是第11代成品車 性能有很大的提升了 項目公布了原理圖和PCB大家可以自己下載使用

#include 
#define LED     2
#define NUM_LEDS    6
CRGB leds[NUM_LEDS];

#define PINX A5
#define PINY A3
#define PINKG A1

#define PINLU 5
#define PINLD 6
#define PINRU 10
#define PINRD 9

int TZ=200;//速度調整
int speedcal=0;

int Direction;//方向原始數據
int correctionXR;//x修正后的X
int correctionXL;//x修正后的X
int spd=255;
unsigned long Speed;
unsigned long KGSG;
void motorprint();
void motorcontrol();
void dealX();//X方向調整

void motorprint()
{
  pinMode(PINX, INPUT); //設置引腳為輸入模式
  pinMode(PINY, INPUT); //設置引腳為輸入模式
  pinMode(PINKG, INPUT); //設置引腳為輸入模式
  pinMode(A0, OUTPUT); //設置引腳為輸入模式
  pinMode(LED, OUTPUT); //設置引腳為輸入模式

    pinMode(PINLU, OUTPUT); //設置引腳為輸出模式
    pinMode(PINLD, OUTPUT); //設置引腳為輸出模式
    pinMode(PINRU, OUTPUT); //設置引腳為輸出模式
    pinMode(PINRD, OUTPUT); //設置引腳為輸出模式

    digitalWrite(PINLU,LOW);
    digitalWrite(PINLD,LOW);
    digitalWrite(PINRU,LOW);
    digitalWrite(PINRD,LOW);
}

void motorcontrol()
{
  if ((TZ>5)&&(Speed>Direction))
  {
     speedcal=(Speed-Direction);
     analogWrite(PINLU,constrain(Speed,0,254));
     analogWrite(PINLD,constrain(Speed,0,254));
     analogWrite(PINRU,constrain(speedcal,0,254));
     analogWrite(PINRD,constrain(speedcal,0,254));
  }
  else if (TZ<-5)
  {
  //  speedcal=constrain(map((Speed+Direction),Speed,310,Speed,250),Speed,250);
    speedcal=(Speed+Direction);
    analogWrite(PINLU,constrain(speedcal,0,254));
    analogWrite(PINLD,constrain(speedcal,0,254));
    analogWrite(PINRU,constrain(Speed,0,254));
    analogWrite(PINRD,constrain(Speed,0,254));
  }
  else
  {
    analogWrite(PINLU,constrain(Speed-5,0,254));
    analogWrite(PINLD,constrain(Speed-5,0,254));
    analogWrite(PINRU,constrain(Speed+1,0,254));
    analogWrite(PINRD,constrain(Speed+1,0,254));
  } 

}

void setup()
{

 // Serial.begin(19200);
   motorprint();
   FastLED.addLeds(leds, NUM_LEDS);
   digitalWrite(A0,HIGH);

   for(int i=0;i<6;i++)
   {
    leds[i] = CRGB ( 225,255,255);
   }
   FastLED.show();

}

void loop()
{

  /*Speed =pulseIn(Y, HIGH,80000);
Direction =pulseIn(X, HIGH,80000);
 KGSG = pulseIn(KG, HIGH,80000);*/

  KGSG = pulseIn(PINKG, HIGH,80000);
  if(KGSG<1100)
  {
  spd=3;
     for(int i=0;i<6;i++)
   {
    leds[i] = CRGB ( 0,0,255);
   }
   FastLED.show();
  }
  else if(KGSG<1700)
  {
  spd=2;
     for(int i=0;i<6;i++)
   {
    leds[i] = CRGB ( 225,0,255);
   }
   FastLED.show();}
  else if(KGSG<2000)

  {spd=1;
     for(int i=0;i<6;i++)
   {
    leds[i] = CRGB ( 225,0,0);
   }
   FastLED.show();
   }
  else
  spd=255;

  Speed=(constrain(map(pulseIn(PINY, HIGH,80000),989,1968,0,250), 0, 250)/spd);
  Direction =constrain(map(pulseIn(PINX, HIGH,90000),998,1982,-TZ,TZ),-TZ,TZ); 

  if (Speed<20)
  {
    Speed=0;
    digitalWrite(A0,LOW);
    motorcontrol();
  }
  else
  {
       digitalWrite(A0,HIGH);
       motorcontrol();
  }

}