The STM32MP157D-DK1 and STM32MP157F-DK2 Discovery kits leverage the capabilities of the increased-frequency 800 MHz microprocessors in the STM32MP1 Series to allow users easily develop applications using STM32 MPU OpenSTLinux Distribution software for the main processor and STM32CubeMP1 software for the co-processor.
[STM32MP157D 800MHz Discovery kit board photo]
They include an ST-LINK embedded debug tool, LEDs, push-buttons, one Ethernet 1-Gbps connector, one USB Type-C® OTG connector, four USB Type-A Host connectors, one HDMI® transceiver, one stereo headset jack with analog microphone, and one microSD™ connector.
To expand the functionality of the STM32MP157D-DK1 and STM32MP157F-DK2 Discovery kits, two GPIO expansion connectors are also available for ARDUINO® and Raspberry Pi® shields.
Additionally, the STM32MP157F-DK2 Discovery kit features an LCD display with a touch panel, and Wi-Fi® and Bluetooth® Low Energy capability.
主要特性
Common features
STM32MP157 Arm®-based dual Cortex®-A7 800 MHz 32 bits + Cortex®-M4 32 bits MPU in TFBGA361 package
ST PMIC STPMIC1
4-Gbit DDR3L, 16 bits, 533 MHz
1-Gbps Ethernet (RGMII) compliant with IEEE-802.3ab
USB OTG HS
Audio codec
4 user LEDs
2 user and reset push-buttons, 1 wake-up button
5 V / 3 A USB Type-C® power supply input (not provided)
Board connectors:Ethernet RJ454 × USB Host Type-AUSB Type-C® DRPMIPI DSISMHDMI®Stereo headset jack including analog microphone inputmicroSD™ cardGPIO expansion connector (Raspberry Pi® shield capability)ARDUINO® Uno V3 expansion connectors
On-board ST-LINK/V2-1 debugger/programmer with USB re-enumeration capability: Virtual COM port and debug port
STM32CubeMP1 and full mainline open-source Linux® STM32 MPU OpenSTLinux Distribution (such as STM32MP1Starter) software and examples
Support of a wide choice of Integrated Development Environments (IDEs) including IAR Embedded Workbench®, MDK-ARM, and STM32CubeIDE
Board-specific features
4" TFT 480×800 pixels with LED backlight, MIPI DSISM interface, and capacitive touch panel
Wi-Fi® 802.11b/g/n
Bluetooth® Low Energy 4.1
!注意:請使用瀏覽器自帶下載,迅雷等下載軟件可能無法下載到有效資源。
器件 | 類型 | 描述 | 數據手冊 |
---|---|---|---|
ST-LINK-SERVER | STM32性能和調試程序 | ST-LINK服務器軟件模塊 | 點擊下載 |
STSW-LINK007 | STM32 編程 | ST-LINK、ST-LINK/V2、ST-LINK/V2-1、STLINK-V3板固件升級 | 點擊下載 |
STSW-LINK009 | STM32實用軟件工具 | 為Windows 7、Windows 8、Windows 10簽署的ST-LINK、ST-LINK/V2、ST-LINK/V2-1 USB驅動 | 點擊下載 |
STM32CubeMP1 | STM32Cube MCU和MPU包 | STM32CubeMP1包,用于STM32MP1系列(HAL、底層API和CMSIS(CORE、DSP和RTOS)及用于處理器間通信的OpenAMP,附帶在以下ST板上運行的示例:探索套件和評估板) | 點擊下載 |
STM32MP1Distrib | STM32MP1 OpenSTLinux分發套件 | STM32 MPU OpenSTLinux 分配 | 點擊下載 |
歡迎加入EEWorld參考設計群,也許能碰到搞同一個設計的小伙伴,群聊設計經驗和難點。 入群方式:微信搜索“helloeeworld”或者掃描二維碼,備注:參考設計,即可被拉入群。 另外,如您在下載此設計遇到問題,也可以微信添加“helloeeworld”及時溝通。
EEWorld Datasheet 技術支持